Wi-Fi that covers every room.

If you have moved the router three times, bought a mesh kit and the video calls still freeze in half the house, the problem is not your internet plan. Los Angeles homes are hard on Wi-Fi: plaster over wire mesh, long single-story layouts, thick 1920s walls, detached offices and big lots. The fix is not another gadget, it is a network designed for the building.

How we do it

• Site survey: we measure signal room by room and find where coverage actually dies and why
• Design: wired access points in the right ceilings and walls, not plugged-in repeaters guessing at range
• Enterprise hardware: the same access points used in hotels and offices, managed from one clean app
• Wired backbone: cabling runs that let every access point perform at full speed
• Verification: we walk the house again and show you the coverage before we call it done

Beyond the house

Backyards, pool areas, garages and ADUs get outdoor-rated access points and proper cable runs, so the office over the garage works as well as the kitchen counter. If cameras, streaming boxes and smart home gear share the network, we segment it so one misbehaving device never takes down your work call.

Where we work

We build home networks across Pacific Palisades, Brentwood, Beverly Hills, Santa Monica, Burbank and Santa Clarita. A solid network is also the foundation for cameras and whole-home automation, so it is usually the first thing we get right.

Common questions

Why is my Wi-Fi slow in the back rooms?

Usually distance plus building materials. Every wall between the router and your laptop eats signal, and lath-and-plaster or stucco walls eat a lot of it. One router cannot cover a spread-out LA house; several wired access points, placed where people actually sit, can.

Is this better than a mesh kit from the store?

A wireless mesh repeats signal over the air, so every hop cuts speed, and the far nodes are repeating an already weak signal. Our access points are wired, so each one delivers full speed. Same idea, done the way hotels and campuses do it.

Can you run wires in a finished home without damage?

In most homes, yes. Attics, crawl spaces and closets give us paths, and openings are small and patched. Where a wire truly cannot go, we say so and design around it honestly.

Will this fix video calls and streaming for good?

If the survey says the problem is coverage or congestion, yes, and that is what it is in most homes. If your internet service itself is the bottleneck, we tell you before you spend anything on the network.

Read next

• Why Wi-Fi keeps dropping in a large house, the full explanation.
• What to pre-wire before drywall, if you are building or remodeling.